Aluminum alloy flange encoder operating temperature -40-+90℃ SC65F optical rotary encoder
About Encoder Vibration
Vibration acting on an encoder always cause wrong pulse easily.
So we have to pay more attention to encoder working place.
The more pulse per round, the narrower groovy spacing of grating,
ore effect to encoder by vibration, when motor speed is low or even
stopped, vibration acting on encoder shaft or encoder shell would
cause grating vibration, in this way, encoder might show wrong
pulse signal.
Feather of SC65F encoder
Brand: HENGXIANG
Encoder type: Incremental encoder
External diameter: 65mm
Flange dimension: 68mm x 68mm
Shaft length: 26mm
Solid Shaft diameter: 15mm( KEYWAY 5mm)
Load Voltage: ≤DC30V
GND: not connect to encoder
Factory Encoder Production Capability
5000 pieces per month
-------- Production Line Capacity
50000 pieces per year
--------Actual Units Produced (Previous Year)
Why choose us?
HENGXIANG brand--The trustworthy partner
CE approved--advantaged product quality;
Fast delivery--strong stock product ability;
Factory directly provide a competitive price;
One-stop service--for your efficient purchasing experience;
OEM design accepted--customized design, your own brand accepted.
SC65F Encoder Characteristics
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| External diameter | 65mm |
| Thickness | 58mm |
| Flange dimension | 68mm x 68mm |
| Installation dimension | 56mm x 56mm |
| Shaft length | 26mm |
| Solid Shaft diameter | 15mm( KEYWAY 5mm) |
| Resolution | 50;60;100;200;250;256;300;360;400;450;500;512;600;720;1000 |
| 1000;1024;1200;1250;1440;1800;2000;2048;2500;2880;3000; |
| | 3600;4000;4096;5000;5760;8192;10000;11520;16384;20000; 23040 |
| Output phase | Phase A+,B+,Z+,A- B- Z- |
| Supply voltage | DC5V ； DC8-30V |
| GND | not connect to encoder |
| Mark to Space ratio | 45% to 55% |
| starting torque | less than 10m N.m |
| Intertia moment | less than 3x 10-6kg.m2 |
| Shaft load | Radial 30N; Axial 20N |
| Top REV | 5000RPM ;IP65≤3000 RPM |
| Bearing life | 1.5x109 revs at rated load(100000hrs at 2500RPM) |
| Environmental temperature | Operating:-20 ～+80°；storage:-25 ～+85° |
| Environmental humidity | Operating and storage: 35-85%RH(noncondensing) |
| Vibration(endure) | Amplitude 0.75mm,5-55Hz,2 hours for three axis individually |
| Sock(endure) | 490m/s2 ,11 ms three times for X,Y,Z direction individually |
Principle of encoder
The DNL accuracy is the phase angle error as an absolute value
given in (mechanical) degrees.
An incremental encoder outputs a defined amount of pulses per
revolution, so that every pulse is expected to be on a defined
mechanical position. The maximum deviation between this ideal
position and the actual position is called integral non linearity
(INL). The INL accuracy is an important value if the incremental
encoder is used for positioning tasks.
The duty cycle describes the ratio between “high” time to “low”
time of an incremental encoder. Typically this ratio is 50/50,
which is equivalent to 180 el° high and 180 el° low.
The performance of magnetic incremental encoders increases with
higher PPR settings and higher rotation speeds (RPM). This is in
contrast to optical encoders where the performance decreases. The
DNL and INL accuracy that are stated in our datasheets are worst
case values, a better performance can be expected for higher PPR
and RPM.
This is the maximum frequency that the encoder is able to output
via the output lines.
For example, the frequency of a 1024 PPR encoder that rotates at
600 RPM is 200 Hz (200*1024/60s).
