11520ppr Voltage output K50 high resolution rotary encoder cable 1
meter customizable size
Principle of encoder
The differential outputs have the highest frequency response
capability and the best noise immunity. To ensure this the receiver
should also be a differential.
Replacement of Older Output Drivers
A logic gate interprets certain input voltages as high (logic 1) or
low (logic 0).
TTL (transistor-transistor-logic): A signal above 2 V is
interpreted as logic 1 and a signal less than 0.8 V is interpreted
as logic 0. The output voltage ranges between 0-5 V.
HTL (high-threshold-logic): A signal above 3 V is a logic 1 and a
signal less than 1 V is a logic 0. The high output signal level is
dependent from the supply voltage. Because of the higher voltage
difference between logic 0 and 1, the HTL logic is more immune to
interference and more resistant against electrical noise.
Mechanical degree is the actual rotation of the shaft in degrees.
Electrical degree is used for electrical signals. The required time
for completing one alternating voltage/current cycle is defined as
360 electrical degrees (el°). For incremental encoders, one cycle
is equal to one complete pulse. With a given PPR the electrical
degree can be converted to mechanical degree for any incremental
encoder.
Production date
3-5 working days for sample after full paid
7-15 days for mass production after full paid
Payment terms
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Matters needing attention
1. Must choose the power supply voltage: DC5V or DC8-30V
2. Must choose leaf spring plate model number if you select hollow
shaft encoder
3. Please advise the motor speed (RPM) that you actually use
4. If you have any other requirements, please provide detail
parameters
Our advantage
Over 18 years encoder production experience
More than 20 years experienced engineers
Professional working team
Utility Model Patent Certificate
Own brand and unique brand
CE certification for all models
Prompt delivery date
Encoder Specification
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| External diameter | 50mm |
| Thickness | 30mm |
| Resolution | 50;60;66;100;200;250;256;300;360;400;450;500;512;600; |
| 700;720;800;900;1000;1024;1200;2000;2048;2500;5000;
8192;10000;16384 |
| 8192;10000；11520；16384；20000；23040 |
| Output phase | Phase A,B,Z A- B- Z- |
| Supply voltage | DC5V ; DC8-30V |
| Outlet type | Cable out from side |
| Cable out from back |
| Output mode | NPN/PNP(Open Collector Output) |
| Voltage output |
| Push-pull output |
| Long line drive (26LS31) |
| Compatible RS422 |
| Long line drive (RT7272) |
| Protection grade | IP50 ; IP65 |
| Cable length | 1000mm |
| starting torque | less than 9.8X10-3 N.m |
| Intertia moment | less than 6.5x 10-6kg.m2 |
| package | Carton box |
| Net weight | About 140g (with package) |
| Certification | CE |
| Shell Material | die cast aluminum |
| Bearing life | 1.5x109 revs at rated load(100000hrs at 2500RPM) |
| GND | not connect to encoder |
More information
If you are looking for more information about our factory or about
our products, please contact us or email us right now, we will
reply you as soon as possible.
