1000ppr 8mm Shaft E50s8-1000-3-t-24 high resolution rotary encoder
Autonics Encoder
Key Features of S50 series rotary encoder
Sock(endure): 490m/s2 ,11 ms three times for X,Y,Z direction
individually
Shaft Material: Stainless steel
Shell Material: die cast aluminum
Shaft length: 16mm
GND: not connect to encoder
Cable length: 1000mm(cable with shielding)
Package: Carton box
Solid Shaft diameter: 8mm(D shape)
Product introduction
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| External diameter | 50mm |
| Thickness | 30mm |
| Shaft length | 16mm |
| Solid Shaft diameter | 8mm(D shape) |
| Environmental humanity | Operating and storage: 35~85%RH (non-condensing) |
| Protection grade | IP50 ; IP65 |
| Cable length | 1M (cable length could be added appropriately by |
| require, but it need payment individually) |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| starting torque | less than 5X10-3 N.m |
| Resolution | 50;60;100;200;250;256;300;360;400;450;500;512;600; |
| 700;720;800;900;1000;1024;1200;2000;2048;2500;5000 |
| | 8192;10000；11520；16384；20000；23040 |
| Output phase | Phase A+,B+,Z+ A- B- Z- |
| Supply voltage | DC5V ; DC8-30V |
| Outlet type | Cable out from side |
| Cable out from back |
| Socket out from back |
Our Service
- Quick response once received customer’s quotation query
- Professional engineer team, to solve your problems at any time
- Strictly inspection before shipment
- Various encoder models to be selected
- Short lead time
- High quality standard
ENCODER TECHNOLOGY THEORY
An incremental encoder outputs a defined amount of pulses per
revolution, so that every pulse is expected to be on a defined
mechanical position. The maximum deviation between this ideal
position and the actual position is called integral non linearity
(INL). The INL accuracy is an important value if the incremental
encoder is used for positioning tasks.
The duty cycle describes the ratio between “high” time to “low”
time of an incremental encoder. Typically this ratio is 50/50,
which is equivalent to 180 el° high and 180 el° low.
The performance of magnetic incremental encoders increases with
higher PPR settings and higher rotation speeds (RPM). This is in
contrast to optical encoders where the performance decreases. The
DNL and INL accuracy that are stated in our datasheets are worst
case values, a better performance can be expected for higher PPR
and RPM.
This is the maximum frequency that the encoder is able to output
via the output lines.
For example, the frequency of a 1024 PPR encoder that rotates at
600 RPM is 200 Hz (200*1024/60s).
S50 ordering encoder model number
S50-D3F50 DC8V
S50-D3P60 DC8V
S50-Q2N100 DC12V
S50-Q2F200 DC24V
S50-D1N250 DC8-30V
S50-Q1F256 DC5-30V
S50-D3N300 DC5-30V
S50-T3V360 DC12V
S50-T6E1024 DC8-24V
S50-T6C2048 DC5V
S50-D3NH4096 DC24V
S50-T3FH500DC12V
S50-T4C8192 DC24V
S50-D4E10000 DC8-30V
S50-Q3PH16384 DC5-12V
S50-Q6E2000 DC12-24V
S50-D6C23040 DC5V
S50-D3P20000 DC5V
S50-D3PH2500 DC12V
