Photoelectric incremental encoder 2048 pulse S50F quadrature rotary
encoder with axial cable
Quick review of S50F encoder
Installation dimension: 43mm x 43mm
Shaft length: 13.3mm
Solid Shaft diameter:8mm(D shape)
Encoder type:Incremental encoder
Brand:HENGXIANG
Consumption current:100mA MAX
Mark to Space ratio:45% to 55%
Top REV:5000RPM ;IP65≤3000 RPM
Shell Material:die cast aluminum
S50F rotary encoder Product introduction
| Items | Basic parameters |
| Brand | HENGXIANG |
| Resolution | 50;60;100;200;250;256;300;360;400;450;500;512;600;720;1000 |
| 1000;1024;1200;1250;1440;1800;2000;2048;2500;2880;3000; |
| | 3600;4000;4096;5000;5760;8192;10000;11520;16384;20000; 23040 |
| Output phase | Phase A,B,Z or A- B- Z- |
| Supply voltage | DC5V ; DC8-30V |
| Outlet type | Cable out from side |
| Cable out from back |
| Socket out from back |
| Output mode | NPN&PNP |
| Voltage output |
| Push-pull output |
| Difference output(TTL,HTL,RS422) |
| Protection grade | IP50 ; IP65 |
| Cable length | 1M (cable length could be added appropriately by |
| require, but it need payment individually) |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| GND | not connect to encoder |
| Mark to Space ratio | 45% to 55% |
| starting torque | less than 5 x 10-3 N.m |
| Intertia moment | less than 3x 10-6kg.m2 |
| Shaft load | Radial 40N; Axial 20N |
| Top REV | 5000RPM ;IP65≤3000 RPM |
| Bearing life | 1.5x109 revs at rated load(100000hrs at 2500RPM) |
Some model number of S50F Series encoder
S50F-T6C4096
S50F-Q4E3600
S50F-D3N3000
S50F-T3F2880
S50F-Q2V2500
S50F-D1F2048
S50F-T6E2000
S50F-Q3P360
S50F-D2F300
About Our Factory
- Own brand of "HENGXIANG" encoder
- Has ISO9001:2000 Quality Management System Certificate and CE
Certification
- Invention patents five and utility model patents five
- Passed Shanghai New and High-tech Achievements Transformation
Project.
- Our target: Meeting Client's Requirement,Creating Social
value,serving clients attentively and Achieving win-win.
- Located in Shanghai city
- 20-30 experienced workers
ENCODER TECHNOLOGY THEORY
An incremental rotary encoder outputs a certain amount of Pulses
per Revolution. The higher this PPR number, the smaller the angle
between each pulse. This PPR number is fixed for ordinary
incremental encoders. Programmable incremental encoders can adjust
this value to a desired number by a software change.
Today most incremental encoders have a Push-Pull (HTL) or RS422
(TTL) output driver, these have replaced most of the older output
circuits like Open Collector NPN, Open Collector PNP, Voltage
Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a
signal level which corresponds to the applied supply voltage. The
supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to
replace true open collector circuits by using an external diode
connected in a way to limit the direction of the current for RS422
(TTL) circuits provide a constant 5 V signal level that is not
dependent on the supply voltage. Two supply voltage ranges can be
selected: From 4.75 to 5.5 VDC (can be used to replace open
collector output drivers) or from 8 to 30 VDC. Using differential
signals the output fully complies to the RS422 standard.
More information
If you are looking for more information about our factory or about
our products, please contact us or email us right now, we will
reply you as soon as possible.
