8192 resolution open-collector output incremental encoder diameter
of axle 10mm K50
Encoder Characteristics
Hollow shaft diameter:8mm, 10mm, 12mm; 14mm; 15mm
Resolution :50;60;66;100;200;250;256;300;360;400;450;500;512;600;
700;720;800;900;1000;1024;1200;2000;2048;2500;5000;
8192;10000;16384；23040
Consumption current:100mA Max
Bearing life:1.5x109 revs at rated load (100000hrs at 2500RPM)
Shaft Material:Stainless steel
Shell Material:Die cast aluminum
Protection grade:IP50; IP65
Parameter table
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| External diameter | 50mm |
| Thickness | 30mm |
| Installation dimension | R27.5mm,R30mm, R34.5mm |
| Output mode | NPN/PNP(Open Collector Output) |
| Voltage output |
| Push-pull output |
| Long line drive (26LS31) |
| Compatible RS422 |
| Long line drive (RT7272) |
| Environmental temperature | Operating temperature: -20~+90° |
| Storage temperature: -25~+100° |
| Environmental humanity | Operating and storage: 35~85%RH (non-condensing) |
| Shell | Die cast aluminum |
| Consumption current | 100mA Max |
| Shaft Load | Radiel: 40N; Axial:20N |
| Top REV | 5000RPM ;IP65≤3000r rpm |
| Insulation strength | AC500V 60s |
| Insulation resistance | 10MΩ |
| package | Carton box |
| Net weight | About 140g (with package) |
| Certification | CE |
Technical Theory
Mechanical degree is the actual rotation of the shaft in degrees.
Electrical degree is used for electrical signals. The required time
for completing one alternating voltage/current cycle is defined as
360 electrical degrees (el°). For incremental encoders, one cycle
is equal to one complete pulse. With a given PPR the electrical
degree can be converted to mechanical degree for any incremental
encoder.
Every 90 el° the incremental encoder outputs a rising or falling
edge on the “A” or “B” output that can be interpreted as a count.
If an encoder outputs 1000 PPR, a counter can interpret 4000 counts
(4 counts each pulse).
The phase angle states the length between 2 edges, given in el°.
This parameter is typically specified with a defined constant phase
angle value and phase angle error (also called quadrature error).
Package
Each single encoder is packed into a single safe carton with
protecting bubble.
Then all encoders will be put into a bigger carton to prepare
shipment.
Payment terms
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
About our factory
1. Own brand of "HENGXIANG" encoder
2. Has ISO9001:2000 Quality Management System Certificate and CE
Certification
3. Invention patents five and utility model patents five
4. Passed Shanghai New and High-tech Achievements Transformation
Project.
5. Our target: Meeting Client's Requirement,Creating Social
value,serving clients attentively and Achieving win-win.
6. Located in Shanghai city
7. 20-30 experienced workers
About Encoder Vibration
Vibration acting on an encoder always cause wrong pulse easily.
So we have to pay more attention to encoder working place.
The more pulse per round, the narrower groovy spacing of grating,
ore effect to encoder by vibration, when motor speed is low or even
stopped, vibration acting on encoder shaft or encoder shell would
cause grating vibration, in this way, encoder might show wrong
pulse signal.
