KC76 through hole encoder 3000 counts per resolution 350g hollow
shaft 25mm with keyway
Factory Encoder Production Capability
5000 pieces per month
-------- Production Line Capacity
50000 pieces per year
--------Actual Units Produced (Previous Year)
Delivery date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and
ship on time
KC76 Slot encoder Parameter table
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| External diameter | 76.5mm |
| Thickness | 28mm |
| Installation dimension | R34.5mm(spring plate 76T69) |
| Hollow shaft type | through hole with slot |
| Hollow shaft diameter | 18mm,20mm,22mm;25mm |
| Resolution | 100;200;250;300;360;400;450;500;512;600;720;800;1000;
1024;1200;1800;2000;2048;2500;3000;3600;4096;5000; |
| 7200;8192;10000；14400;16384；28800；32768 |
| 1024/4;1024/6;1024/8;2048/4;2048/6;2048/8;2500/4;2500/6;
2500/8;4096/4;4096/6;4096/16;5000/6;5000/8;5000/10;
5000/12;5000/16; |
| 8192/8;8192/10;/8192/16;10000/8;10000/10;10000/16; |
| Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
| Supply voltage | DC5V ; DC8-30V |
| Outlet type | Cable out from side |
| Output mode | NPN/PNP(Open Collector Output) |
| Voltage output |
| Push-pull output |
| line drive (26LS31) TTL |
| line drive(DC8-30V) HTL |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| GND | not connect to encoder |
| Mark to Space ratio | 45% to 55% |
| starting torque | less than 80 x 10-3 N.m |
| Intertia moment | less than 100x 10-6kg.m2 |
| Shaft load | Radial 70N; Axial 50N |
| Top REV | 3000RPM |
Notice for encoder installation
1. Please read the encoder specification carefully before
installation
2. Encoder is belong to precision instrument, so we should avoid
shock or vibration to protect interior parts.
3. The power supply voltage must be holded within specified range,
or encoder could be destroyed.
4. Notice coaxially requirements when you install the power shaft,
please use flexible coupling and do not press encoder forcibly.
5. Shielding cable of encoder must be connected to avoid
electromagnetism interference of alternating current, cables of
encoder should be layout individually.
6. Wiring diagram connection should be strictly follow the
specified color in catalogue, or encoder interior circuit may be
destroyed
7. Encoder should be apart from powerful magnetic field, dust, oil,
water, higher (lower) temperature and caustic or flammable material
during working.
8. The encoder cable signal can’t be drew or bent forcibly.
Production Catalogue
If you have already selected the encoder model you are going to
order, please email us directly or contact online service right now
to get the latest catalogue.
But if you are still have any doubts on choosing a right encoder
model number, you are also free to contact us to get the related
catalogue.
